TANK: 200 gallons (757 liters) stainless steel tank, double wall design, single compartment, 16” (406mm) manhole with 10” (254mm) fill opening with emergency pressure / vacuum vents.
CHASSIS: The Refuel/Defuel Cart undercarriage utilizes a towable two axle, four wheeled rolling chassis design that is self-supported on its own rigid or non-suspension axle mount configuration suitable for ramp usage at speeds up to 15 mph. It is designed with a steerable front tow bar arrangement so that it is easily towed or tugged with normal aircraft ramp equipment. Minimum steering angle for tow bar is +/- 40 degrees. The tow bar includes a mechanism to hold it in the upright position so it is not a trip hazard when not in use.
TRANSPORTING: Unit has built-in fork lift pockets for lifting complete unit. Unit also has lifting lugs and tie downs installed for lifting with a crane and securing while transporting by highway, air, rail or marine.
STANDARD DIMENSIONS: Length: 143” (363cm); Width: 61” (155cm); Height: 62” (158cm)
Ground clearance: 16” (40cm); Weight 3,300 lbs (1,497kg)
PUMP: Hydraulically driven, positive displacement type with adjustable bypass valve.
MOTOR/ENGINE: Hatz tier IV diesel engine; JP-8 compatible, starter motor, alternator, fuel filter, air filter, auto shutdown for head temperature and oil pressure, cold weather start assist, extended capacity oil sump, spark arrestor and manual start hand crank capability.
HYDRAULIC PUMP: Includes hydraulic pump, hydraulic motor, hydraulic fluid tank with electrically operated hydraulic cooling fan.
FILTER: 0.5 Micron Filter/Separator rated at 50 GPM (189 liters) for jet fuels and 60 GPM (227 liters) for Avgas. Filter also has water detections system with positive shutdown, Millipore sample connections and DP pressure gauge. Fuel is filtered while performing fueling and defueling operations.
METER: One meter, 60 GPM (227 liters) rated with large numeral reset counter and totalizer, registers in one-tenth U.S. gallons (liters optional).
HOSE REEL: Spring rewind reel with non-ferrous internals sized for 40’ (12.2m) x 1-1/2” (38mm) jack riser hose. Hose rollers are included and a shutoff valve is installed immediately upstream of the hose reel.
HOSE: One 40’ (12.2m) x 1-1/2” (38mm) API certified jack riser aviation fueling hose.
NOZZLE: One overwing nozzle with swivel, 100 mesh strainer and quick disconnect. Unit also comes with defuel wand with quick disconnect.
DEADMAN CONTROL: Electronically controlled deadman handle for defuel and recirculating operations.
CONTROL PANEL: Centrally located control/operation panel to include: system power, ignition switch control, engine start switch, mode selector, manifold indicator light, water in filter detection light, volt meter and emergency stop button.
PIPING: Schedule 10 stainless steel, welded wherever possible – 150 PSI rated working pressure. Mechanically operated internal valve, electronically operated valves automatically switch fueling operations from fueling, defueling or recirculation.
CABINETS: There are 2 cabinets installed on the unit. The cabinet in the front houses the diesel engine, hydraulic pump and operating control panel. The cabinet in the rear houses the pump, hose reel, filter, meter and pumping components. Doors for cabinets are hinged and include lockable lifting assist shocks.
TEST: Unit is flow tested with fuel for performance to rated specifications.
FINISH: Unit is painted one color. Color determined at time of order. Equipment is natural color. Unit placards include: warnings, product placards and supplier data tags.
SAFETY FEATURES: Static reel with 50” (190mm) cable and bonding clamp, emergency shutdown system, tank water drain, 10 gallon spill kit, wheel chocks, lighted equipment cabinet and two fire extinguishers.
COMPLIANCE: Meets all applicable NFPA 407 & 385 codes.
OPTION: The above-listed items are for a standard Garsite refueler. All units can be customized to fit your specific requirements. Please contact your Garsite representative for a complete list of available options and configurations.
This monthly repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (Australian Credit License: 389328) This estimate is based on a Chattel Mortgage, which is only available where the purchaser of the item intends to use the item for primarily commercial use. The term of this loan is based 60 months with 30% residual & subject to qualifying commercial assets and credit criteria. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive away price, any repayment estimate does not include additional costs, such as stamp duty and other government charges. The term of this loan is 60 months. This estimate should be used for information purposes only and is not an offer of finance on particular terms. This repayment estimate is the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd’s panel of lenders and products for this specific item each day, and includes several assumptions about the item, purchaser, and loan specifics. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd loan approval process. A specific quote including details of all fees and charges, or loans for items with primarily or wholly personal use can be obtained via overdrivefunding.com.au or by calling 1800 954 124.
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.
Get Financing
