Configuration Utility - SAR
Certification EASA/FAA
• Aluminum aloy and bonded panel fuselage
• Semi-monocoque aluminum alloy tail boom
• New reinforced skid type landing gear
• Two (2) hinged jettisonable crew doors (LH and RH)
• Two (2) sliding passenger doors (LH and RH), 1,40m opening, with jettisonable Windows
• Acrylic transparent windshield and side Windows
• Acrylic transparent overhead Windows
• Quick-removable tail rotor drive shaft cover
• Separate baggage compartment with hinged door
• Removable fairing and cowlings, for complete
• Accessibility to he controls and drive components
• Quick-opening hinged inspection doors, to allow visual check of engine oil levels and maintenance inspection points
• Grounding points
• Jacking and hosting points
Rotor
Rotor Notes
ROTORS AND CONTROLS
• Titanium mainrotor hub, corrosion protected, fully articulated with four (4) composite grips, four (4) elastomeric bearings, four (4) individually interchangeable composite material blades, swept tips, and dampers
• Cyclic and collective contros powered by two (2) hydraulic systems
• Hydraulically powered anti-torquesystem
• Adjustable friction devices on cyclic and collective system
• Forcem trim and artificial feel system
• Adjustable directional control pedals
• Flapping and droop restraint mechanism
Engine 1
Engine 1 Notes
POWER PLANT AND FUEL SYSTEM
• Two(2) Pratt & Whitney Canada PW207C turboshaft engines
• Two (2) independente electronic control systems (FADEC) with normal emergency and training operation modes and auto-start
• Two (2) engine-mounted fuel pump and filter assembly Two (2) engine-mounted
• Oil ump and filter assembly
• Two (2) engine-mounted fuel controls and governor
• Lubrification and cooling system Two (2) engine oil chip detectors
• Engine control panel Two (2) independente fuel systems with cross-feeding valve and control panel
• 3-cell crash -resistant fuel system (5751-152 USgal)
• Two (2) submerged fuel boost pumps Airframe mounted eaysaccessfuel filter
• RH refuelling point
• Ground fuel drains
Avionics
Avionics/Radios
DUAL PILOT VFR AVIONIC PACKAGE
• Three (3) 6" x 8" display units providing two (2)
• Primary Flight Display (PFD) and one (1)
• Multifunction Display(MFD) and integrating:
- Synthetic Vision System (SVS) - Highway In The Sky (HITS)
- Helicopter Terrain Awareness and Warning System (HTAWS) - Flight Management - Radio tuning controls
• Dual Data Acquisition unit (Dau)
• Dual Air Data Computer and Attitude Heading
• VHF/AM
• GPS
• Mode-S & Ads-B Out Transponder
• Pilot and Co-Pilot Intercommunication System (ICS)
• Two (2) Magnetic Direction Indicators
• Dual Master Warning Lights
• Dual Master Caution Electronic
• Standby Indicator
• Dual Controls
AVIONICS EQUIPMENT
• Dual Pilot IFR Package
• 2nd VHF/AM
• 2nd VOR/ILS
• 2nd GPS DME
• Marker Beacon
• Digital clock
• Emergency Locator Transmitter (ELT)
• Digital map Euronav VII Euro avionics
• The standard Global Package includes:
• Raster Map Data: EUROAVIONICS Outline Map (basic detail), EUROAVIONICS Map 1:1.000.000
• Vector Map Data: EUROAVIONICS Overview Map (basic detail)
• Terrain Data: DTED 0
• Database: Jeppesen NavData
• Additional maps/options and any updates need to be ordered directly to Euro avionics by the Customer.
Additional Equipment
Additional Equipment
TRANSMISSION DRIVE SYSTEM AND HYDRAULIC SYSTEM
• 960shp fortake-off and 900 shp continuous operation ain transmission
• 3-stage transmission
• Two (2) freewhelling units
• Dual independente, redundant hydraulic systems
• Two (2) transmission-mounted hydraulic pumps with separate reservoir Internal dry sump
• Transmission lubrication with pressure and sacavenge pump and oil filter
• Two (2) transmission oil chip detectors
• Single stage, bevel gear tail rotor 90º gear box including oil level sight glass and chip detector
• Transmission cooling and lubrification system
• Transmission shafits
• Instrument lights with dimming switch
• Radio master switch with ground function
ELECTRICAL SYSTEMS
• 24VDC 33Ah Nickel-cadmium battery with temperature problem
• Two (2) 200 A self-cooled starter generators
• Two (2) voltage regulators
• Battery relay
• Two (2) interconnecting bus relays
• External power relay
• Distribution buses (one [1] battery, two, [2 essential, two [2] emergency, two [2] main, two [2] auxiliary)
• Distribution buses (one [1] battery, two, [2 essential, two [2] emergency, two [2] main, two [2] auxiliary)
• External power receptacle
• External power receptacle Position lights (NVG friendly - green, red, White)
• Position lights (NVGfriendly- green, red, White)
• Two (2) cockpit utility lights
PREMIUM EQUIPMENT
• Crash-resistant co-pilot seat, foreand aft adjustable, with lab belts and headrest
• Shoulder harness with inertial reels (co-pilot)
• AC power supply sistem (two [2] inverters) 4-axis Digital AFCS,
• Integrating Flight Director functionalities
• Radar altimer
• Doors key lock
• Airframe hourmeter
• Baggage compartment lights
• Crew open door actuator
• Two (2) engine compartment fire extinguisher
• Fuel cap with key-lock
• Pulsed chip detectors (iIn lieu of quick-disconnecting chip detectors.)
• 450 W Retractable/rotating landing light (Nose-mounted)
• Reinforced windshield
• Baggage compartment extension (1.9m)
• Bleed air heater
• Passenger footstep (RH)
MISCELLANEOUS/GROUND EQUIPMENT
• Ground tools kit (including tow bar, ground wheels, lifting tool)
• Pitot tubes covers
• Rotorcraft Flight Manual (RFM) (hard copy) and technical publications (soft copy)
• Tie-down fittings (main rotor retention straps)
ADDITIONAL EQUIPMENT, NOT INSTALLED
• Engines Inlet Barrier Filters (IBF)
UTILITY EQUIPMENT
• First aid kit
• Rotor brake
• Windshield wipers for pilot and co-pilot
• Cargo hook (1250 kg) - Provision
• External rescue hoist(272 kg/600 lb) (Breeze) – Provision
• Requires Wireless ICS Polycon system.
• Wireless Communication Polycon Next Generation
• Required for Human External Cargo (HEC) operations
• Wire Strike Protection System
• Rape ling hooks (2 LH – 2 RH)
Exterior
Year Painted
2025
Exterior Notes
EXTERIOR FINISHING
Finishing accordance with manufacturer specification
Primer exterior painting
Interior
Year Interior
2025
Interior Notes
INTERIOR ARRANGEMENT
• H10-13H David Clark headsets (pilot and co-pilot)
• Crash-resistant pilot seat, fore and aft
• Shoulder harness with inertial reels (pilot)
• Aluminum alloy honeycomb reinforced floor with anti-skid finishing
• Ventilation ram air inlets
• Anti-reflection instrument panel
• Primer finished cabin walls
• Portable fire extinguisher
PROPOSED CONFIGURATION
• Utility interior (Rigid liners)
• Passenger cabin
• All seats crash-resistant covered with leatherette
• Three (3) fwd facing seats (aft bench)
• Three (3) aft facing seats (central bench)
• 4-point shoulder harness with inertial reels and safety belts for all seats
• Rigid liners
• Intercommunication system for passengers
• Cabin loudspeakers (Qty 2)
• Reading lights, advisory lights Upper and lower air vents
• Headset H10-13H David Clark (Qty 6)
• Cockpit equipment
• Standard cockpit interior
This monthly repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (Australian Credit License: 389328) This estimate is based on a Chattel Mortgage, which is only available where the purchaser of the item intends to use the item for primarily commercial use. The term of this loan is based 60 months with 30% residual & subject to qualifying commercial assets and credit criteria. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive away price, any repayment estimate does not include additional costs, such as stamp duty and other government charges. The term of this loan is 60 months. This estimate should be used for information purposes only and is not an offer of finance on particular terms. This repayment estimate is the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd’s panel of lenders and products for this specific item each day, and includes several assumptions about the item, purchaser, and loan specifics. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd loan approval process. A specific quote including details of all fees and charges, or loans for items with primarily or wholly personal use can be obtained via overdrivefunding.com.au or by calling 1800 954 124.
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.